Lexmark 5200 Series Quick Start Manual

5200 Series All-In-One

Safety information

• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.

Unpack your All-In-One.

1
Note: Contents may vary based on geography.
Note: You may need to purchase a
USB cable separately.
Press to scroll to your language
4
and then press .

Remove the sticker and tape from the print cartridges.

8
21D0070

Connect the power cord.

Your All-In-One may include a
2
photo cartridge instead of a
black print cartridge.
Before you continue, remove the
photo cartridge from the print
cartridge storage unit.
Reminder: Save the print
cartridge storage unit to protect
unused cartridges.
Lift the paper support and extend
5
the paper exit tray.
Open the cartridge lids, insert the cartridges, and
9
snap the lids closed.
• Refer service or repairs, other than those described in the user documentation, to a professional
service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply cord or telephone, during a lightning storm.

Load paper and adjust the paper guide.

6
10
www.lexmark.com

Make sure the Power light is on.

3

Lift the scanner unit.

7

Close the scanner unit.

Steps 11 - 15