4.
Determine the trigger whose volume should be adjusted. In order to do this, press one
of the pad select keys or simply hit the pad. To select a trigger that is associated with the
edge of a pad, press the [RIM] button additionally to the pad select key. To select the
trigger of the closed hi-hat, press the [HI-HAT CONTROL] button additionally to the pad
select key. The triggers RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH can
not be selected by keystroke, but only by playing them (see also
and pads' on page 86).
ð The pad select key LED lights up.
5.
Use the [+] / [–] buttons or the jog wheel to select the desired volume.
6.
Select the next trigger and adjust the volume as described.
7.
Conclusively save the settings with [SAVE/ENTER].
Any unsaved changes are discarded when selecting another kit or switching the unit
off.
MPS-600
Operation
Ä Chapter 10.1 'Trigger
43