thomann Mellenium MPS-600 User Manual page 38

Operation
Modifying and saving user kits
38
With your drum set, you can use the existing preset kits as a basis for user kits. The user kits can
then be either stored in the device or on an SD card.
1.
Use the [PAGE –] button to change to the preset kit group and select the desired kit with
the [+] / [–] buttons or the jog wheel.
2.
Press the [SAVE/ENTER] button.
ð The display shows 'Sv>' as well as the number and name of the first user kit, in fac‐
tory default condition 'MyKit001' . The current memory slot is indicated in the lower
right area of the display as 'DATA xxx' .
3.
Use the [+] / [–] buttons or the jog wheel to select that user kit, you want to assign set‐
tings of a preset kit to.
4.
Press the [SAVE/ENTER] button.
ð The first character of the kit name is highlighted and can be changed using the [+] /
[–] buttons or the jog wheel. Use the [PAGE –] and [Page +] button to move the
cursor to the next or previous position.
5.
Confirm the change with [SAVE/ENTER].
ð The display briefly shows 'SAVE OK!' . Then the original kit is displayed with the new
name and the new memory slot. The change of the presets take effect immediately.
e-drum module