Table of Contents
Advertisement
Modifying a drum kit
For each trigger of the drum kit, you can set the corresponding sound and several sound
parameters.
1.
Press the [KIT] button.
ð The display shows the number and name of the currently selected drum kit, e.g.
'Acoust-1' .
2.
Select the desired drum kit using the [+] / [–] buttons or the jog wheel.
To change from the group of preset kits to the group of self-created drum kits use the
[PAGE+] (jump to 'MyKit001' ) or [PAGE–] (jump to 'Acoust-1' ) buttons.
3.
Press the [MENU] button.
ð The display shows the parameter 'VOICE' .
4.
Press the [SAVE/ENTER] button.
5.
Determine the trigger whose settings you want to change within the selected drum kit.
Therefore press one of the pad select keys or simply hit the pad. To select a trigger that is
assigned to the edge of a pad, press the [RIM] button in addition to the pad select key.
To select the trigger of the closed hi-hat, press the [HI-HAT CONTROL] button in addition
to the pad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH
triggers can not be selected by keystroke, but only by playing them (see also
Ä Chapter 10.1 'Trigger and pads' on page 86).
MPS-600
Operation
29
Hide quick links:
Advertisement
Table of Contents
