thomann Mellenium MPS-600 User Manual page 32

Operation
Pattern function
32
Each trigger can be programmed so that when you hit the respective pad not just a single
sound is produced, but a complex pattern or a preset or user song is played. Up to seven pads
can be programmed within a user kit for playing patterns / songs.
1. Press the [KIT] button.
ð The display shows the numbers and the names of the currently selected drum kit,
e.g. 'Acoust-1' .
2. Press the [MENU] button.
ð The display shows the parameter 'VOICE' .
3.
Determine the trigger to which you want to program a specific pattern. Press one of the
pad select keys or simply hit the pad. To select a trigger that is assigned to the edge of a
pad, press the [RIM] button in addition to the pad select key. To select the triggers that
are assigned to the closed hi-hat, press the [HI-HAT CONTROL] button in addition to the
pad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH triggers
can not be selected by keystroke, but only by playing them (see also
'Trigger and pads' on page 86).
ð The pad select key LED lights up.
4. Press the [PAGE+] button.
ð The display shows the value 'Pattern: OFF' .
e-drum module
Ä Chapter 10.1