thomann Mellenium MPS-600 User Manual page 39

Saving on SD card
Any unsaved changes are discarded when selecting another kit or switching the unit
off.
1. Use the [PAGE +] button to change to the user kit group and select the desired kit with
the [+] / [–] buttons or the jog wheel.
2.
Press the [SAVE/ENTER] button.
ð The display shows 'Sv>' as well as the number and name of the first user kit, in fac‐
tory default condition 'MyKit001' . The current memory slot is indicated in the lower
right area of the display as 'DATA xxx' .
3. Press the [PAGE +] button.
ð 'CurKit > Card' appears in the display. Select this option to save the current kit to the
SD card. To save all user kits to the SD card, press [PAGE +] again. The option 'ALLKits
> Card' appears in the display.
MPS-600
Operation
39