Electrical Data; Safety; Tests - Dolomite STEP UP Manual Operating Instructions Manual

DOLOMITE STEP UP DOLOMITE STEP UP
Voltage out
Voltage in
Max. battery capacity
Intermittents
To be used solely as a platform support.
Standing on the frame is not permitted.
Standing on the armrests is not permitted.
Unevenly distributed weight affects the product's stability
Ensure that all knobs and screws are properly tightened before use.
* Widening the frame
* Armrests
* Handle
Observe caution on sloping ground:
Observe caution on wet surfaces.
The user's max. weight DOLOMITE STEP UP 150 kg.
The "Stand assist" accessory must always be used with the accompanying safety harness.
Platform support with electrical operation must not be used in the shower.
The platform support is equipped with emergency stop and emergency lowering.
Do not use the platform support while charging
No responsibility is taken for changes made to the platform support (adaptations, substandard repairs), outside
INVACARE DOLOMITE's control.
• This platform support is tested according to ISO standard SS-EN ISO 11199-3:2006 and fulfils its require-
ments.
10

Electrical data

24 V
100-240 V, 50-60 Hz
2,9 Ah
10%, max. 2 minutes/
18 minutes

Safety

Tests

Operational duration
Tightness class
Operative temperature
Sound level
app. 40 cycles without
charging
IPX4
+5°C to +40°C
48 dB (A)