Appendix B: Faq - Planet Networking & Communication WIPG-300H User Manual

FAQ1 : How to reset the WIPG-300H to factory default
[ANSWERS]
1) Power off the WIPG-300H.
2) Press and hold the button with paper clip, and then plug in the DC jack of the AC adapter to power on
WIPG-300H. After 10~15 seconds, you can release the button.
Reset Button
3) Now, you should be able to login the WIPG-300H by default setting. (Default username and password are
both "admin".)
FAQ 2: How to use WIPG-300H to output the screen to the projector or LCD via HDMI cable
[ANSWERS]
You can switch the output interface through the web UI. The default setting is VGA.
However, if you want to use HDMI interface directly without switching:
(1) Plug the HDMI connector and turn on the projector or LCD first.
(2) Then just power on the WIPG-300H to achieve it.
FAQ 3: With the Windows XP client, how to output the audio via the audio jack of the WIPG-300H when
the video is projected
[ANSWERS]
(1) First of all, please install "VAC.exe" (Virtual Audio Control) first on your computer. The software can be
found in the USB Token.
(2) After the driver is installed, please launch WIPG utility.
(3) Click Menu icon and select "Send Audio to Display" to Yes.
(4) After restarting WIPG utility, you can have the audio via the audio jack of the WIPG-300H.
PLANET 802.11n Wireless Interactive Presentation Gateway
Screw hole
(Optional kit for Wall Mount)
76

Appendix B: FAQ

WIPG-300H