Control Panel; Show Receiver Information - Planet Networking & Communication WIPG-300H User Manual

Step 3. Click the

3.2. Control Panel

Button
Please refer to the following sections for detailed instructions of the menu.

3.2.1. Show Receiver Information

Click "Show Receiver Information" and it will display the Receiver Information, such as Wi-Fi Name, IP
Address and code on the upper of desktop. It will close automatically after 30 seconds.
PLANET 802.11n Wireless Interactive Presentation Gateway
button to start projection
Figure 3-3 WIPG Utility – Control Panel
Figure 3-4 WIPG Utility – Control Panel Function Introduction
Description
Start Full Screen Projection
Project to Split No. 1
Project to Split No. 2
Project to Split No. 3
Button
Project to Split No. 4
Stop projecting
Freeze The Projection Screen
Enable the Magnifier function
17
WIPG-300H
Description