Step
Screw (quantity)
2
M2 × 5 mm, small-head, nylon-coated (4)
1050 Internal storage drive and the storage drive connector
For access, remove this FRU:
•
"1030 Base cover assembly" on page 63
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or in suspend mode.
Removal steps of storage drive and the storage drive connector
Disconnect the storage drive connector from the system board and remove the storage drive together with
the storage drive connector.
66
Hardware Maintenance Manual
1
2
3
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)