Set The Flash Time; Set The Dial Mode - VTech FS6325A User Manual

To set the ringer volume:
In main menu, press Settings.
1.
2. Press ▲/▼ to highlight Base, then press OK.
3. Press OK to select Ringer.
Press ▲/▼ to highlight Ringer Volume.
4.
5. Press ◄/► to select your desired ringer volume from Off,
Level 1 to Level 5.
OK to confirm. Saved displays and you hear a
6. Press
confirmation tone.

10.10.2 Set the Flash Time

The default flash time is best suitable for your country and network
operator. It is unlikely that you should need to change this setting
unless advised to do so.
In main menu, press Settings.
1.
2. Press ▲/▼ to highlight Base, then press OK.
3. Press ▲/▼ to highlight Flash Time, then press OK.
4. Press ◄/► to select the desired flash time.
5. Press OK to confirm. Saved displays and you hear a
confirmation tone.
NOTE
Flash time options are country dependent. Possible options are
80/100/120/180/200/250/300/600ms.

10.10.3 Set the Dial Mode

In main menu, press Settings.
1.
2. Press ▲/▼ to highlight Base, then press OK.
3. Press ▲/▼ to highlight Dial Mode, then press OK.
Press ◄/► to select Tone or Pulse.
4.
5. Press OK to confirm. Saved displays and you hear a
confirmation tone.
69