Delete Your Outgoing Message; Tam Settings; Set The Answer Mode - VTech FS6325A User Manual

NOTES
1. Your outgoing message can be up to 90 seconds in length.
2. Outgoing messages shorter than three seconds are not recorded.

11.6.3 Delete your Outgoing Message

In main menu, press TAM.
1.
2. Press ▲/▼ to highlight Outgoing Msg, then press OK.
3. Press OK to select Play OGM.
4. Press ◄/► to select Ans & Rec or Ans Only.
5. If you have recorded your own outgoing message, it will be
played.
6. Press Delete
7. After deleting the message, the handset displays Deleted and the
pre-recorded outgoing message will be played.
NOTE
The pre-recorded message cannot be deleted.
11.7

TAM Settings

In the answering system setup menu, you can change the settings for
answer mode, answer delay, recording time and call screening.

11.7.1 Set the Answer Mode

1. In main menu, press TAM.
Press ▲/▼ to highlight TAM Settings, then press OK.
2.
3. Press ◄/► to select Ans & Rec or Ans Only as the desired
answer mode.
OK
4. Press to confirm.
5. The handset displays Saved and you hear a confirmation tone.
to delete your own recorded outgoing message.
81