VTech FS6325A User Manual page 32

3. If there is free pairing slot, the screen displays Place Bluetooth
headset next to the base. Press OK.
If there are already four paired devices on the device list, the
screen displays Maximum of 4 devices can be paired. Follow the
instructions to replace a device and remove it from the paired list.
4. The screen displays Please set your headset to discoverable
mode. The telephone base is in discoverable mode. Set your
headset to discoverable mode (refer to the user's manual of your
headset), then press OK.
All devices that are connected to the telephone base are
disconnected until the pairing process completes.
5. The screen displays Searching for Bluetooth headset...
6. When the screen displays the found devices, press ▲/▼ to
highlight your desired headset and then press OK.
7. Enter the PIN of your headset. The PIN for most Bluetooth
devices is 0000 (refer to the user's manual of your headset).
Then press OK.
8. The handset displays Pairing is in progress, then Paired with
Headset when the operation is successful. Press OK.
If there is another headset already active, the screen shows
Only 1 headset can be connected. and prompts you to replace
an existing active device. Follow the instructions to remove the
handset from the Active Device list.
9. The handset then displays Headset X is paired to the base.
Connect now?. Press
If there are already two connected handsets on the Active
Device list, the handset shows Maximum of 2 devices can
be connected. Follow the instructions to replace a device and
remove it from the Active Device list.
10. The handset displays Connecting Headset X to the base...,
then Headset setup is completed. Device is connected. when
the operation is successful.
Yes to connect.
24