Table of Contents
Advertisement
RE4QS/EX (TLS-S8000P GB) Wed. May, 23/2001
DAY/TIME SEARCH
1
Press the SEARCH/AUDIO ON button three times
during stop mode.
Y "T/D SEARCH 01 00:00" will be displayed on
screen.
1H22M33S
T/D@SEARCH
01@@00:00
DAY@TIME
2
Press the REC/PLAY SPEED l (or j) button to
set the desired day, then turn the JOG dial
clockwise.
3
Press the REC/PLAY SPEED l (or j) button to
set the desired hour, then turn the JOG dial
clockwise.
4
Press the REC/PLAY SPEED l (or j) button to
set the desired minutes.
NOTES:
X The setting can be made in 10 minutes
increments only.
X For recordings made on other VCRs, the exact
time may not be found even if the minutes are
entered. For tapes recorded on older models of
VCRs produced by this company (the ones
without a minutes setting for the day/time search
function), make sure to set the minutes to "00".
5
Turn the SHUTTLE ring clockwise (or
counterclockwise).
Y The desired day/time is searched and a still
image of the recording will appear on-screen.
6
Press the PLAY button.
Y Playback will start.
NOTES:
X If during a search the end of the tape is reached, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
X The alarm and day/time data are recorded on the
tape in a similar format. If they overlap, the alarm
data will have the priority. Therefore, when searching
for a day/time when an alarm recording was done,
the day/time search will not stop at the desired
location. In such a case, use alarm scan to find the
desired recording location.
X The day/time search function may not operate
correctly if searching for a timer recording time or if
the clock on the recording VCR has been adjusted
using the CLOCK ADJUSTMENT function.
X If a recording on a tape extends for over a one month
period, the same day may be present twice on the
tape. If such a day is searched, since there is no
month search setting, the desired day may not be
found.
X If the recording has been made in 120-hour or more
mode, the day/time search with a minutes setting
(see step 4 above) will not operate. When using the
day/time search function on such a recording, set the
minutes (see step 4 above) to "00".
34
English
Advertisement
Table of Contents
