Table of Contents
Advertisement
RE4QS/EX (TLS-S8000P GB) Wed. May, 23/2001
TAPE MANAGEMENT FUNCTION
Setting the Tape Management Function
1
Press the MENU button until the (TAPE
MANAGEMENT) menu is displayed.
@@@<TAPE@MANAGEMENT>
*TAPE@MANAGE.@@@@N
*PROTECT@DAY@@@@@30
*REC@PASS@SET@@@@10
*GROUP@NO.@@@@@@@OFF
*OVERRIDE@@@@@@@@N
2
Turn the SHUTTLE ring, to select the desired mode.
N . . . . . . . . . The tape management function is
not active.
Y . . . . . . . . . The tape management function is
active.
When setting to "Y", please continue with the settings
below.
3
Turn the JOG dial, until the "PROTECT DAY"
setting is flashing.
4
Turn the SHUTTLE ring, to select the desired
number of days to protect the tape.
OFF. . . . . . . The tape is not protected.
1-255 . . . . . . Number of days to protect the tape
(prevent over-recording), from the
date of the last recording on the
tape (or the last expected recording
date (calculated using the tape
length (E-180) and the recording
speed)).
NOTES:
X Since the last expected recording date is a
calculated date (using the tape length (E-180)
and the recording speed), it may be different from
the actual last recording date, this due to other
settings such as (alarm recordings, programme
timer recordings, holiday settings).
X When setting a programme timer recording, the
tape protection term is checked when the VCR is
set to programme timer recording stand-by mode.
X When a programme timer recording is done, the
data is updated when recording starts. Even if
the recording is stopped before the programmed
time, the original data (last expected recording
date) will remain as calculated.
5
Turn the JOG dial, until the "REC PASS SET"
setting is flashing.
6
Turn the SHUTTLE ring, to select the desired
number of re-recording times.
OFF. . . . . . . The number of re-recording times
will not be checked.
1-100 . . . . . Maximum number of re-recording
times.
(Refer to "Concerning the Number of Times Tapes
can be Rerecorded on" on page 19.)
NOTES:
X The data is updated at the beginning of the
recording. Even if the recording is stopped before
the end, the original data information will be
considered.
X During Autorepeat recording, the re-recording
times count will be updated every time the tape is
rewound to the beginning. Autorepeat recording
will proceed even if the count exceeds the "REC
PASS SET" setting. If in the (SET UP 2) menu,
WARNING is set to "Y", the buzzer is heard.
7
Turn the JOG dial, until the "GROUP NO." setting is
flashing.
8
Turn the SHUTTLE ring, to select the desired group
number.
OFF . . . . . . The group number will not be
checked.
1-15 . . . . . . Group number setting.
9
Turn the JOG dial, until the "OVERRIDE" setting is
flashing.
F
Turn the SHUTTLE ring, to select the desired
override mode.
Y . . . . . . . . . In case of a conflict that prevents
recording, the next operation is
executed. If recording is done, then
the last recording date and the
re-recording times count are
updated.
N. . . . . . . . . In case of a conflict that prevents
recording, the (TAPE
MANAGEMENT) menu is displayed
and the conflicting setting
preventing recording will flash. The
only possible action is to press the
EJECT button, in order to eject the
tape. (Refer to "Tape Management
Conflict Display".)
G
Press the SEARCH/AUDIO ON button to save the
settings.
NOTES:
X Once the tape management data is recorded on
tape, it cannot be changed.
X The criteria (condition) for allowing recording will be
based on the data recorded on the tape and not the
settings in the (TAPE MANAGEMENT) menu.
16
English
Advertisement
Table of Contents
