Subscribe to Our Youtube Channel
Related Manuals for Mitox 260L
Summary of Contents for Mitox 260L
- Page 1 BRUSHCUTTERS 260L/260U/ 330U/ 430U USER MANUAL, MAINTENANCE INSTRUCTIONS AND SPARE PARTS READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE WARNING: THIS SYMBOL INDICATES IMPORTANT SAFETY PRECAUTIONS...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS: Before starting please note the following: • Always ensure that your hair is tied safely This brushcutter should only be used for to avoid any risk of contact with moving cutting grass, bush and light shrub. Using parts. the product for any other use not covered in this manual could compromise the user’s •... -
Page 3: Safety Symbols
SAFETY SYMBOLS 6. Beware of objects being thrown from the operating zone. 1. Warning, Danger, Caution 7. Warning: keep all people, animals and vulnerable objects at least 15 2. Read the documentation and safety metres from the working area. instructions which are provided in this user manual. -
Page 4: Safety Equipment
Safety equipment: A) Safety helmet G) Safety shoes B) Ear defenders H) Heavy duty work suit C) Safety visor I ) Anti vibrating support D) Harness L) Throttle lever with stop switch E) Gloves M) Engine with overheating protection F) Cutter guard... -
Page 5: Technical Specification
TECHNICAL SPECIFICATION MODELS Mitox 260 Mitox 330 Mitox 430 Dry weight (without cutting tools and gasoline.) 5.8 kg 6.7 kg 7.4 kg Fuel tank capacity: (litres) 0.7 l 0.75 l 1.1l Blade diameter: (mm) Blade thickness: (mm) Number of teeth Fixation hole diameter: (mm) 25.4... - Page 6 ASSEMBLY The safety guard must be secured to the support, near the gear case, with the four Before operating, make sure that all parts screws and two plates provided. have been correctly assembled HARNESS : HANDLEBAR ASSEMBLY (‘U’handle) The harness provided has foam hip protection.
- Page 7 FITTING THE NYLON HEAD Screw the nylon head anti-clockwise (turn left) onto the threaded shaft at the blade MUST end of the gear case. Keep the shaft correctly positioned on the upper locked place inserting blade clamp otherwise SERIOUS screwdriver or hexagonal key through DAMAGE INJURY the hole in the upper blade clamp and...
-
Page 8: Fuel Mixture
MAIN PARTS BRUSHCUTTER : Make sure that all nuts and screws are securely tightened. Make sure that both the 1. Fuel tank - 2 stroke mixture. safety guard and the cutting heads used are 2. Stop control switch. correctly assembled. 3. -
Page 9: Engine Starting
shaft firmly on the ground. With the right hand, slowly pull the recoil starter The petrol and oil must be handle until engagement of the pawls mixed prior to filling the fuel tank. For with the flywheel is felt. best results, add the oil to the fuel can 5. -
Page 10: Using The Brushcutter
USING THE BRUSHCUTTER Which setting to use with each cutting head ? The safety guard is two coloured the main part red and the small blade The correct operating stance must have holder is black. both feet placed firmly on the ground and the body well balanced. - Page 11 CORRECT USE OF THE 3 TOOTH It is also recommended that, after a few BLADE. hours of work, the machine be allowed to idle at low rpm’s for a few minutes to allow the engine to cool. All safety systems and parts MAINTENANCE of the machine must be in good order when the brushcutter is in use.
- Page 12 GEAR BOX. In order to re-mix the oil with the petrol, vigorously shake the mixture Every 25 hours, grease the gearbox. in the fuel tank before use. Unscrew the lateral cap of the gearbox and Dispose of fuel mixture after one put grease inside using an appropriate tool.
-
Page 13: Conditions Of Warranty
Retain the receipt of purchase without which no warranty can be offered. U.K. IMPORTER To find your nearest stockist and authorised service dealer please contact: Mitox Garden Machinery Wincanton Business Park WINCANTON Somerset BA9 9RS U.K.
Need help?
Do you have a question about the 260L and is the answer not in the manual?
Questions and answers