Safety precautions Information regarding use of loudspeakers Never stand in the immediate vicinity of loudspeakers driven at a high WARNING! level. Professional loudspeaker systems are capable of causing a sound pressure level detrimental to human health. Seemingly non-critical sound levels (from approx. 95 dB-SPL) can cause hearing damage if people are exposed to it over a long period.
The Q1 is the Q-Series line array loudspeaker. It is used in vertical columns giving a 75° constant directivity dispersion pattern in the horizontal plane. The Q1 cabinet is a passive two-way design that houses 2 x 10" LF drivers and a 1.3" HF compression driver with a toroidal wave shaping device and a passive crossover network.
Connections The Q1 cabinet is fitted with a pair of EP5 connectors. All five pins of both connectors are wired in parallel. The Q1 uses the pin assignments 1/2. Pins 3/4 and 5 are designated to Q-SUB active subwoofers, passive...
For acoustic adjustment the functions CUT, HFC and CPL can be selected. CUT circuit Set to CUT, the Q1 low frequency level is reduced. The Q1 is now configured for use with the Q-SUB or d&b C-Series subwoofers. HFC circuit...
Dispersion characteristics The graphs below show dispersion angle over frequency of a single Q1 cabinet plotted using lines of equal sound pressure (isobars) at –6 dB and –12 dB. The nominal horizontal dispersion of 75° is maintained above 400 Hz.
Manufacturer's declarations EU conformity of loudspeakers (CE symbol) This declaration applies to - Q1 loudspeaker Z0501 manufactured by d&b audiotechnik GmbH. All production versions of this type are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.
Need help?
Do you have a question about the Q1 and is the answer not in the manual?
Questions and answers