Setting The Sea-Level Pressure - Bresser 433MHz Instruction Manual

Setting the Sea-Level Pressure

1. In Pressure and Weather Forecast Mode, press SET until the sea-level pressure is displayed.
2. Press and hold SET. The Sea-Level Pressure display should be fl ashing.
3. Set Sea-Level Pressure:
Press UP or DOWN to adjust value. Press and hold either button for fast advance.
Press SET to confi rm your selection.
4. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Setting the Pressure and Altitude Units
1. In Pressure and Weather Forecast Mode, press SET until local pressure is displayed.
2. Press and hold MEMORY. The pressure unit should be fl ashing.
3. Set Local Pressure Units:
Press UP or DOWN to adjust value.
Press SET to confi rm your selection.
4. Set Altitude Units:
Press UP or DOWN to adjust value.
Press SET to confi rm your selection.
5. Set Sea-Level Pressure Units:
Press UP or DOWN to adjust value.
Press MEMORY to confi rm your selection.
6. Upon completion the display will be returned to Pressure and Weather Forecast Mode.
Viewing the Sea Level Pressure History
1. In all modes, pressing HISTORY will toggle the sea level pressure display.
2. When sea level pressure is displayed, press HISTORY repeatedly to view sea level pressure data
for each of the last 24 hours.
3. If no buttons are pressed for 5s, the display automatically returns to Pressure and Weather
Forecast Mode.
Viewing the Pressure/ Temperature/ Humidity Bar-Charts
The bar-chart on the display can be confi gured to display the history data for sea-level pressure,
temperature or humidity for channel 1.
In Pressure and Weather Forecast Mode, press and hold ALARM/CHART to toggle the bar-chart
between:
- Sea-level pressure ("PRESSURE" should be displayed)
- Temperature (Thermometer icon and "CH1" should be displayed)
- Humidity (RH icon and "CH1" should be displayed)
Viewing Moon Phase History and Forecast
1. In Pressure and Weather Forecast Mode, press MEMORY.
2. "+ 0 days" should be fl ashing.
3. View Moon Phase History / Forecast:
Press UP or DOWN to choose number of days forward (+ days) or backward (- days) from
current date. Press and hold either button for fast advance.
The corresponding moon phase will be shown.
4. To exit, press MEMORY.
Otherwise, if no buttons are pressed for 5s the display automatically returns to Pressure and
Weather Forecast Mode.
16