Moving or Transporting the Machine
●
Moving or Transporting the Machine
1
Moving the Machine
1
Turn OFF power to the machine.
(1)
Press the [POWER] button until a "pip"
sound is heard.
2
(2)
"Shutdown is in progress." appears for a
3
while, and then the power is turned OFF.
(3)
Turn the power switch OFF.
2
Remove the following parts.
• Unplug the power cord and ground wire
• Remove any cables
• Remove any paper from the trays
4
3
Three or more people are required to safely
move the machine.
5
6
7
For the equipment with additional tray
units installed
Before moving the machine, remove the anti-tip feet and then
unlock the casters (two places).
After moving the machine, lock the casters and then return the
anti-tip feet to their original positions.
For more information, refer to the Setup Guide.
Transporting the Machine
Because the machine is precision equipment, it may get
damaged during transportation, depending on the packaging
method. Please transport it via the following procedure.
1
Turn OFF power to the machine.
(1)
Press the [POWER] button until a "pip"
sound is heard.
(2)
"Shutdown is in progress." appears for a
while, and then the power is turned OFF.
(3)
Turn the power switch OFF.
2
Remove the following parts.
• Unplug the power cord and ground wire
• Remove any cables
• Remove any paper from the trays
3
Insert your finger into the recess on the
right side of the machine and pull the front
cover open lever to open the front cover
forward.
Note
• Open the front cover gently. If you open it rapidly, the
multi-purpose tray may open.
Front Cover
- 76 -
Front Cover
Open Lever