Oki MB760dnfax User's Manual And Troubleshooting Manual page 21

Message
Toner near Empty
This original is copy protected
DEPARTMENT Quota exceeded.
Contact the Administrator.
Not enough Work Space to store
originals
Will you print out stored originals?
USER Quota exceeded.
Contact the Administrator.
USER and DEPARTMENT Quota
exceeded.
Contact the Administrator.
The number of originals exceeds the
limits.
The scanned data are deleted.
The number of originals exceeds the
limits.
Will you copy stored originals?
Error Codes
The error codes indicating the status of the equipment may appear on the touch panel. You can find the listings of these error codes
in Chapter 7.
 P.46 "Error Codes"
Problem Description
Toner is running out.
An attempt is made to copy a
prohibited original.
The copying, printing or scanning
quota to the department has reached
"0".
Internal memory available ran out
while scanning.
The copying, printing or scanning
quota to the user has reached "0".
The copying, printing or scanning
quota to the user and department has
reached "0".
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning. (The
magazine sort or page number
function is used.)
The number of originals to be
scanned has exceeded the limit of
1000 sheets during scanning.
- 21 -
TROUBLESHOOTING FOR THE HARDWARE
Corrective Action
Some toner is still left in the toner cartridge while this message is
displayed. You do not have to replace the toner cartridge yet.
Prepare a new toner cartridge.
(About another 1000 copies can be made after this message
appears. Depending on the conditions of copying, this message
may not appear even when the toner cartridge is near empty.)
Note
• Replace the toner cartridge after the toner has completely run
out. [Install new *** toner cartridge] is displayed at that time.
This original cannot be copied.
For details of setting the quota, ask your administrator.
To print out the data for the originals stored (scanned) until the
message appeared, press [YES] on the touch panel. To delete the
stored data, press [NO].
For details of setting the quota, ask your administrator.
For details of setting the quota, ask your administrator.
Reduce the number of originals to be scanned, and try again.
To print out the data for the originals stored (scanned) until the
message appeared, press [YES] on the touch panel. To delete the
stored data, press [NO].
1
2
3
4
5
6
7