Changing Audio - Panasonic DMR-E30 Operating Instructions Manual

Changing audio

!?
DVD/TV
DVD POWER TV
DVD TV
Í Í
VCR Plus+ TV/VIDEO REC MODE REC
1 2 3
CH
4 5 6
VOLUME
7 8 9
CANCEL
0 100
SKIP SLOW/SEARCH
DIRECT NAVIGATOR PLAY LIST
TOP MENU
MENU
ENTER
FUNCTIONS RETURN
PROG/CHECK ADD/DLT DISPLAY TIME SLIP
OPEN/CLOSE STATUS FRAME
SETUP AUDIO INPUT SELECT CM SKIP
AUDIO ERASE F Rec POSITION MEMORY MARKER
[RAM] [DVD-R] [DVD-V] [VCD]
You can change the audio being received or played.
During reception or play
Press [AUDIO].
How the type changes depends on when you press the button.
26
RQT6559
∫ While receiving Multi-channel Television Sound
Stereo (MTS)
Stereo > SAP > Mono
^--------------------------------}
Depending on the type of television broadcast and sound selected,
received and recorded sound is as follows:
Audio
selected
Stereo SAP Mono
Television
broadcast
Secondary
Main Main
Stereo audio
audio audio
rSAP
program
§1
(Stereo) (Monaural)
§2
(SAP)
Secondary
Main Main
Mono audio
audio audio
rSAP
program
(Monaural) (Monaural)
§2
(SAP)
§1 §1
Stereo Stereo Stereo Monaural
Mono Monaural Monaural Monaural
§1
Select "Mono" if reception is poor during a stereo broadcast.
§2
If recorded in this mode, main audio is also recorded. Conse-
quently it is possible to choose between MAIN and SAP when
playing back.
No disc
e.g.: "Stereo" is selected
CH 12
(( Stereo
"((" appears when the
unit is receiving the type
of audio you selected.
[Note]
≥If you alter the sound setting during recording, the sound will be
altered in the recording itself also.
≥It will not be possible to alter the sound by pressing [AUDIO] in the
following cases:
- When a DVD-R is in the disc tray
- When recording mode is XP and LPCM has been selected in
the SETUP menu, Audio Mode for XP Recording ( page 53).
≥You cannot change audio type while recording with DVD-R or
recording on DVD-RAM with LPCM sound. You can use the
SETUP menus to select which audio type of an SAP broadcast is
recorded, either "Main" or "SAP" ( page 53, Audio—Select MTS
for DVD-R or LPCM).
∫ While playing DVD-RAM
LR>L>R
^---------------}
≥If you have recorded an SAP broadcast by pressing [AUDIO] to
select SAP
MAIN()SAP
DVD-RAM
PLAY
e.g.: "L R" is selected
L R
For your reference
You can change the audio for the images being played with simulta-
neous rec and play and Time Slip.
∫ While playing DVD-R
You cannot change audio type.
∫ While playing DVD-Video
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack lan-
guage.
Î Digital 3/2.1ch
Sound track 1 ENG
e.g.: English is the selected language.
Î Digital 3/2.1ch
Sound track 2 FRA
The language is switched to French.
∫ While playing Video CD
LR>L>R
^---------------}
V-CD
PLAY
e.g.: "L R" is selected
L R
!?
[Note]
If you cannot change the audio type when you have used only an
optical digital cable for connection, set "Dolby Digital" to "PCM"
( page 51). Alternatively, you may connect to an amplifier with an
audio/video cable and change the input on the amplifier to suit the
connection.
27
RQT6559