Direct Tune - Sirius XM RAdio Onyx EZ User Manual

Using Your Onyx EZ

Direct Tune

A channel can be tuned directly by entering the channel number using the
number buttons .
1. To directly tune to a channel press direct .
2. Use the number buttons 0-9 to enter
the channel number and wait a moment
until the channel is tuned, or press the
Select button to immediately tune to the
channel .
Jump
Depending upon how you configure the mode, pressing jump will either go to the
traffic and weather channel for the city of your choice which you select from a
list of the 22 most congested cities, or go to the last channel to which you were
listening .
TIP! By default jump is configured to tune to a traffic/weather channel . To select a
city for traffic and weather, or to configure jump to tune to the last channel to
which you were listening, refer to "Jump Settings" on page 37 .
Return to Main Display Screen
Pressing and holding menu in most instances will return you to the main display
screen . In some cases, you may need to follow the instructions on the display
screen .
Direct Tune
Enter channel #
6 2 _
27