Sirius XM RAdio Onyx EZ User Manual page 18

Home Installation
signal strength, make small adjustments to the angle of tilt of the clamshell until
the highest possible signal strength is achieved . If you have not wall-mounted
the antenna, turn the antenna slightly to the right or left and observe if the
signal strength increases . For each tweak, allow a few seconds in each position to
determine if the signal strength increases .
If either the Satellite or the Terrestrial signal
bar (or both) are more than half filled, you
are receiving a good signal and are done
aiming the antenna . Exit the Signal Indicator
screen by pressing and holding menu . If Onyx
EZ is displaying channel 1, the XM Preview
channel, with two to three bars of signal
strength displayed at the lower left of the
screen, continue with the next step, otherwise,
continue trying other locations for the antenna .
18
SOUTH
1
866-635-2349
siriusxm.com
XM Preview