Sirius XM RAdio Onyx EZ User Manual page 20

Home Installation
4. If you have connected everything correctly, and you are receiving the XM
signal, you should hear the XM audio from channel 1 .
5. The audio level of your Radio can also be adjusted, if necessary . Refer to
"Set Audio Level" on page 39 to adjust the audio level . The installation is
complete .
To Connect the Home Dock to Your Powered Speakers
The Home Dock can be connected directly to a set of powered speakers .
1. Connect the 1/8" (3 .5 mm) connector from the powered speakers to the
green AUDIO connector at the rear of the Home Dock .
2. Plug the powered speakers into a wall outlet .
3. Turn On the powered speakers .
4. If you have connected everything correctly, and you are receiving the XM
signal, you should hear the XM audio from channel 1 .
5. The audio level of your Radio can also be adjusted, if necessary . Refer to
"Set Audio Level" on page 39 to adjust the audio level . The installation is
complete .
20
AUDIO ANT PWR