Management Vlan Configuration; Interface Requirements - Proxim ORiNOCO AP-4000 User Manual

Advanced Configuration
Interfaces

Management VLAN Configuration

Trunk Mode: In trunk mode if any management VLAN ID is configured then that management VLAN ID should present in
trunk table, then only we can able to manage the device.
Access Mode : In Access mode if any management VLAN ID is configured then that management VLAN ID should be
same as Access VLAN ID, then only we can able to manage the device .
Mixed Mode: In this mode the management VLAN ID should be present either in Trunk table or Access VLAN ID, and
then only we can able to manage the device.
WARNING: Error in configuring the VLAN management ID may result in loss of management access to the
Access Point. If this occurs, then the AP can only be managed via the serial port (console) port.
Configurable VLAN Parameters
Access VLAN ID: The Access VLAN ID is configurable in Access and Mixed mode. The Access VLAN ID values range
from 1 to 4094; the default value is 1.
Access VLAN Priority: The Access VLAN priority is configurable in Access and Mixed modes. The value in VLAN
Priority ranges from 0 to 7. The type of the Access VLAN Priority is VLAN ID only. The default value is 0.
VLAN 1-16: The VLAN IDs are configurable only in the Trunk and Mixed modes and apply in the both modes. The VLAN
ID values range from -1 to 4094. The default value is 4094. Here -1 represents the untagged frames. The maximum
number of VLAN IDs that can be configured in the AP VLAN table is 16.

Interface Requirements

There are several management and monitoring interfaces available to the network administrator to configure and
manage the unit. These are:
•
Web Interface
•
Command Line Interface (CLI)
•
SNMP
AP-4000/4000M/4900M User Guide
72