Proxim ORiNOCO AP-4000 User Manual page 244

Command Line Interface (CLI)
Parameter Tables
Proxy ARP Parameters
Name
Proxy ARP
Status
IP ARP Filtering Parameters
Name
IP ARP Filtering
Status
IP Address
Subnet Mask
Broadcast Filtering Table
Name
Broadcast Filtering Table Table
Index
Protocol Name
Direction
Status
TCP/UDP Port Filtering
The following parameters are used to enable/disable the Port filter feature.
Name
Port Filtering
Port Filter Status
TCP/UDP Port Filtering Table
The following parameters are used to configure TCP/UDP Port filters.
Name
Port Filtering Table
Table Index
Port Type
Type
Group N/A
Integer enable
disable (default)
Type
Group N/A
Integer enable
disable (default)
IpAddress User Defined
IpAddress User Defined
Type
N/A
Integer 1 - 5
DisplayString N/A
Integer ethertowireless
wirelesstoether
both (default)
Integer enable
disable (default)
Type
Group N/A
Integer enable (default)
disable
Type
Table N/A
N/A User Defined
(there are also 4
pre-defined indices, see
Port Number
more information)
Octet String tcp
udp
tcp/udp
AP-4000/4000M/4900M User Guide
Value Access
R
RW
Value Access
R
RW
RW
RW
Value Access
R
N/A
R
RW
RW
Value Access
R
RW
Value Access
R
R
below for
RW
CLI Parameter
parp
parpstatus
CLI Parameter
iparp
iparpfltstatus
iparpfltipaddr
iparpfltsubmask
CLI Parameter
broadcastflttbl
index
protoname
direction
status
CLI Parameter
portflt
portfltstatus
CLI Parameter
portflttbl
index
porttype
244