Advanced Configuration
Interfaces
Interfaces
From the Interfaces tab, you configure the Access Point's operational mode settings, power control settings, wireless
interface settings and Ethernet settings. You may also configure a Wireless Distribution System for AP-to-AP
communications. The Interfaces tab contains the following sub-tabs:
•
Operational Mode
•
Wireless-A (802.11a/4.9 GHz Radio) and Wireless-B (802.11b/g Radio)
•
Ethernet
•
Mesh
NOTE: On APs with model numbers ending in -WD, the operating country must be selected on the
any of these sub-tabs are available.
Operational Mode
From this tab, you can configure and view the operational mode for the Wireless-A (802.11a radio/4.9 GHz radio) or
Wireless-B (802.11b/g radio) interface.
Figure 4-9 Operational Mode Screen (AP-4000/4000M)
AP-4000/4000M/4900M User Guide
System
tab before
55