Advertisement
HF multi-mode transceiver KN920 operation manual (MCU v02.02)
KN920 contains A = B function, which can be very quick to VFO-A and VFO-B frequency set to
the same frequency. To use the A = B function, you need to follow the following steps:
Repeatedly press the DIS button to adjust the second line of the LCD display characters shown
below:
Then press the F3 key will VFO-A and VFO-B frequency equal.
When the current job at the VFO-A, the above result of the operation will VFO-B
is equal to the frequency of the VFO-A.
When the current job at the VFO-B, the above result of the operation will VFO-A
is equal to the frequency of the VFO-B.
Using different frequency transceiver function
In amateur radio work, and sometimes need to get yourself receiving
and transmitting equipment operating at different frequencies.
KN920 has a different frequency transceiver functions, to use this feature, you
need to follow the following steps:
Repeatedly press the DIS button to adjust the second line of the LCD display
characters shown below:
Then press the F1 key, using different frequency transceiver functionality
and
is
not
used
to
switch
between
different
frequency
transceiver
function.KN920 now live in different frequency transceiver operating status
display on the LCD at the second line of the fourth character.When the display
character SPO when, KN920 in different frequency transceiver operating status.
Ham radio products www.bh3mde.com
Email:bh3mde@hotmail.com
- 9 -14
Advertisement
