Advertisement
HF multi-mode transceiver KN920 operation manual (MCU v02.02)
rotate the main frequency knob above the display will change back to, for
example, when the main frequency knob clockwise one bar, LCD display will
change to the second line：
"^" Symbol corresponds to that on the first line of the frequency A is changed when rotating the
main frequency of the knob position to be changed.
Step value is adjusted to the desired position, press the F3 key to return to the previous state, then
the knob and then rotate the main frequency can be changed according to the new step value of the
receive frequency.
Save a frequency to current channel
If a frequency is that you always want to use, such as a local AM radio station
frequency, you can use KN920 channel storage function will preserve these
frequencies, the next time when you need to use can be very easily and quickly
tuned to this channel, easy to listen to.Current channel is displayed on the
LCD first row, fourth and fifth characters represent the number at the
channel.To store a frequency into the current channel, you only need to ensure
that the current work in the VFO mode, then repeatedly press the DIS button to
adjust the second line of the LCD display characters shown below:
At this point press the F4 key to store the frequency of the current work to
the current channel.
Memory frequency to the specified channel
If you want to store the current frequency to the specified channel, need to
follow the following operations:
The KN920 switch to MEM state, if not the MEM status, you can repeatedly press
the DIS button to adjust the second line of the LCD display characters shown
below:
Ham radio products www.bh3mde.com
Email:bh3mde@hotmail.com
- 4 -14
Advertisement
