Advertisement
HF multi-mode transceiver KN920 operation manual (MCU v02.02)
KN920 VSWR can display size.
To use this feature, you need to follow the following steps:
The launch state, long press DIS key to adjust the second line LCD display characters shown
below:
SWR characters behind the black bar represents the number of standing wave
ratio (SWR) in rate.
(Note: SWR meter function can only provide information, its accuracy is not the
focus of the design.)
Ham radio products www.bh3mde.com
Email:bh3mde@hotmail.com
- 14 -14
Advertisement
