Summary of Contents for Ham radio KN920
- Page 1 HF multi-mode transceiver KN920 operation manual (MCU v02.02) KN920 Multi-mode transceiver KN920 operation manual (for MCU v02.02) Ham radio products www.bh3mde.com Email:bh3mde@hotmail.com - 1 -14...
-
Page 2: Switch On/Off Power
This manual does not include installation and commissioning of the machine method, the daily use of the machine that contains only the relevant parts. The specification for the KN920 MCU software version v02.02, you can see on the boot screen KN920. - Page 3 HF multi-mode transceiver KN920 operation manual (MCU v02.02) Knob clockwise main frequency step value can be increased in accordance with certain receiving frequency. Rotate the knob main frequency step value can be reduced according to a certain frequency receiver. If the rotary knob does not change the main frequency receiving frequency, check the following items：...
- Page 4 If you want to store the current frequency to the specified channel, need to follow the following operations: The KN920 switch to MEM state, if not the MEM status, you can repeatedly press the DIS button to adjust the second line of the LCD display characters shown below: Ham radio products www.bh3mde.com...
-
Page 5: Switching Channels
MEM KN920 state, if not the MEM status, you can repeatedly press the DIS button to adjust the second line of the LCD display characters shown below: Then press the F1 key, the first line of the LCD will display the first character is M, ie, channel status. - Page 6 Switching work mode KN920 in LSB, USB, CW, AM, FM mode, these types of work, and you can switch back and forth, to switch to a working model, you need to follow the following steps:...
- Page 7 Then press the F1 key to toggle between insert and cancel KN920 now live broadband and narrowband status is displayed in the first line of the third character LCD to the left. When the display is a long time, the filter N-1 insert.
- Page 8 Then press the F2 key will VFO-A and VFO-B to switch between. KN920 now live VFO status display on the LCD at the first line of the second character. When the character A is displayed, KN920 in the VFO-A.
- Page 9 HF multi-mode transceiver KN920 operation manual (MCU v02.02) KN920 contains A = B function, which can be very quick to VFO-A and VFO-B frequency set to the same frequency. To use the A = B function, you need to follow the following steps:...
- Page 10 . In this mode, press and hold a key down will only be sent once the signal . This model KN920 is defined as KEYER-NORMAL mode.
- Page 11 KN920 adjustment menu brief description (ver01.05) Use UP / DOWN keys function KN920 handle includes a microphone UP / DOWN key, UP / DOWN keys There are three functions: In CW mode and automatic key feature is enabled in the case, UP keys correspond to sending a point;...
-
Page 12: Check The Signal Strength
Now press the F3 key will be received in the use of fine-tuning and fine-tuning does not use the receiver to switch between KN920 whether receiving trimming function in the second line of the LCD can be seen, When the RIT, it means receiving trimming function is not used;... - Page 13 (Note: This feature can only be qualitative, not quantitative be displayed.) View output power intensity KN920 to show the strength of the transmit power.To use this feature, you need to follow the following steps:The launch state, long press DIS key to adjust the second line LCD display...
- Page 14 HF multi-mode transceiver KN920 operation manual (MCU v02.02) KN920 VSWR can display size. To use this feature, you need to follow the following steps: The launch state, long press DIS key to adjust the second line LCD display characters shown...