Advertisement
HF multi-mode transceiver KN920 operation manual (MCU v02.02)
Then press the F4 key will toggle between locking and non-locking.
KN920 now live lock status display on the LCD first character of the second
line.
When displaying a small key symbol, main frequency knob is locked;
When a small key symbol is not displayed when the main frequency knob is not
locked.
Main frequency knob lock restrictions are imposed only on KN920 frequency,
channels, and RIT (Receive fine) adjustment, KN920 all other keys and other
functions will not be restricted.
Switching VFO-A and VFO-B
Now transceiver typically set VFO-A and VFO-B two frequencies, KN920 well.
Setting a variety of roles two frequencies, one of which can be stored in
different frequency operation (SPLIT) of the two frequencies. Here's how to
switch between these two frequencies. To switch to another state, you need to
follow the following steps:
Repeatedly press the DIS button to adjust the second line of the LCD display
characters shown below:
Then press the F2 key will VFO-A and VFO-B to switch between.
KN920 now live VFO status display on the LCD at the first line of the second character.
When the character A is displayed, KN920 in the VFO-A.
When the display character B is, KN920 in VFO-B.
Useing A = B function
Ham radio products www.bh3mde.com
Email:bh3mde@hotmail.com
- 8 -14
Advertisement
