Advertisement
HF multi-mode transceiver KN920 operation manual (MCU v02.02)
KN920 received signal strength can be displayed, the function of the S-meter.
To use this feature, you need to follow the following steps:
Long press the DIS button, adjust the second line of the LCD display characters shown below:
Character S behind the black bar represents the number of signal strength.
(Note: This feature can only be qualitative, not quantitative be displayed.)
View output power intensity
KN920 to show the strength of the transmit power.To use this feature, you need to follow the
following steps:The launch state, long press DIS key to adjust the second line LCD display
characters shown below:
Po character behind the black bar represents how much the strength of the
output power.
(Note: This feature can only be qualitative, not quantitative be displayed.)
Check the strength of the reflected power
KN920 can display the intensity of the reflected power.
To use this feature, you need to follow the following steps:
The launch state, long press DIS key to adjust the second line LCD display characters shown
below：
The characters behind the black bar represents the reflected power much
strength.
(Note: This feature can only be qualitative, not quantitative be displayed.)
View SWR rate
Ham radio products www.bh3mde.com
Email:bh3mde@hotmail.com
- 13 -14
Advertisement
