Fig. 155: Clutch Pilot Bearing & Rear Face Of Crankshaft
Courtesy of GENERAL MOTORS CORP.
4. Inspect the clutch pilot bearing for proper installation.
A properly installed clutch pilot bearing will be installed until flush to the rear face of the crankshaft.
ENGINE FLYWHEEL INSTALLATION
Fig. 156: View Of Engine Flywheel & Bolts (Manual Transmission)
Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
For manual transmission applications, note the position and
direction of the engine flywheel before removal. The flywheel does
not use a locating pin for alignment. Mark or scribe the end of the
crankshaft and the flywheel before component removal. The existing
manual transmission engine flywheel must be installed to the