Engine Front Cover Replacement - Chevrolet 5.7L Corvette 2004 Shop Manual

3. Remove the tool.
4. Inspect the oil seal for proper installation. The oil seal should be installed evenly and completely
into the front cover bore.
6. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .

ENGINE FRONT COVER REPLACEMENT

Tools Required
J 41476 Front and Rear Cover Alignment (Crankshaft Oil Seal Area)
J 41478 Crankshaft Front Oil Seal Installer
Removal Procedure
Fig. 194: Oil Pan-To-Front Cover Bolts & Oil Pan-To-Rear Cover Bolts