Table of Contents
Advertisement
3. Remove the tool.
4. Inspect the oil seal for proper installation. The oil seal should be installed evenly and completely
into the front cover bore.
OIL PAN INSTALLATION
Fig. 85: Front Cover Gasket That Protrude & Oil Pan Surface
Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
All gasket surfaces should be free of oil or other foreign material
during assembly.
The alignment of the structural oil pan is critical. The rear bolt hole
locations of the oil pan provide mounting points for the transmission
housing. To ensure the rigidity of the powertrain and correct
Advertisement
Table of Contents
