Table of Contents
Advertisement
3. Refill the engine oil.
OIL PAN REPLACEMENT
Removal Procedure
Fig. 223: Oil Pan Drain Plug
Courtesy of GENERAL MOTORS CORP.
1. Remove the front suspension crossmember. Refer to Crossmember Replacement - Front Suspension in
Front Suspension.
2. Remove the oil pan drain plug and allow the oil to drain.
3. Re-install the engine oil drain plug until snug.
IMPORTANT: It is not necessary to remove the oil pan (lower) in order to remove the oil
pan.
4. If oil pan and/or gasket removal or replacement is NOT required proceed to step 10.
Advertisement
Table of Contents
