Courtesy of GENERAL MOTORS CORP.
10. Measure the connecting rods for the proper side clearance. Refer to Engine Mechanical Specifications
(LS1) or Engine Mechanical Specifications (LS6) .
CAMSHAFT INSTALLATION
Fig. 57: View Of Bolts installed In Camshaft Front Bolt Holes
Courtesy of GENERAL MOTORS CORP.
IMPORTANT: If camshaft replacement is required, the valve lifters must also be
replaced.
1. Lubricate the camshaft journals and the bearings with clean engine oil.
2. Install 3 M8 - 1.25 x 100 mm (M8 - 1.25 x 4.0 in) bolts into the camshaft front bolt holes.