VALVE ROCKER ARM AND PUSH ROD INSTALLATION
Fig. 112: View Of Valve Rocker Arm Pivot Support
Courtesy of GENERAL MOTORS CORP.
IMPORTANT:
1. Lubricate the valve rocker arms and pushrods with clean engine oil.
2. Lubricate the flange of the valve rocker arm bolts with clean engine oil.
Lubricate the flange or washer surface of the bolt that will contact the valve rocker arm.
When using the valve train components again, always install the
components to the original location and position.
Valve lash is net build, no valve adjustment is required.