Start Sound Mode - Marantz SA-11S1 User Manual

OPERATION
To start playback form the first track
Press button.
PLAY
To stop playback
Press button.
STOP
To eject disc
Press
OPEN/CLOSE
disc off. Press the button again to close the tray.
Disc tray must be closed when the unit is not be used.
To pause playback
Press
PAUSE
PAUSE indicator will light and playback is paused at the point
that the button is pressed. To restart playback, press
button again or press
To change time display
Press the
TIME
Each time
TIME
following order. "Track elapsed time" → "Track remaining time"
→ "Total remaining time" → "Track elapsed time".
• Track remaining time
(The remaining playing time from the playing point to
the end of the current track)
• Total remaining time
(The remaining playing time from the playing point to
the end of the last track)
* If button is pressed when Super Audio CD disc that
TIME
supports text is in use, time display is given priority and the
text information will not be displayed afterward. To see the
text information, press
7 Switching Sound Mode (Super Audio
CD)
Downloaded From Disc-Player.com Marantz Manuals
button to open the disc tray and take the
button.
button.
PLAY
button on the remote control.
button is pressed, display will change in the
"REMAIN"
is displayed
"–" is displayed
"TOTAL REMAIN"
is displayed
"–" is displayed
button.
TEXT
SUPER AUDIO CD PLAYER SA-11S1
OPEN/
PLAY
CLOSE
DISPLAY OFF
STOP
SOUND POWER ON/OFF
MODE
PAUSE
Button
SOUND MODE
q Press
SOUND MODE
playing).
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE
area will be shown, and the layer or area will be switched
to new one.
* When layer or area is switched, TOC will be read again.
* The sound mode cannot be changed for Audio CDs and
discs with only a Super Audio CD area.
* The sound mode on hybrid layer discs will be changed in
the following order.
Super Audio CD stereo area → CD layer → Super Audio
PAUSE
CD stereo area
* Sound mode can be selected while the tray is open. Select
a desired layer or area and press
the tray will close and playback will be started.
w Press the
SOUND MODE
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
SOUND MODE
stopped, and the layer or area will be switched to new one.
When you want to listen at that area, press
again. The playback will be started.

START SOUND MODE

When a Super Audio CD hybrid layer discs that has both a
Super Audio CD high sound quality stereo area and an Audio
CD area information are to be played, this player makes it
possible to set the layer/area (Super Audio CD or Audio CD)
to be preferentially played.
This setting can be made when the tray is closed and there is
no disc in the disc tray.
q Press
SOUND MODE
The currently selected layer/area is displayed.
If the Super Audio CD is selected
If the Audio CD is selected : CD
w Press the
SOUND MODE
area to be played first, and then leave the setting for at
least two seconds to register the setting for the start sound
mode.
Caution
* Start sound mode has a memory retention function where
the settings remain stored and unchanged even when the
disc is changed or the power is turned off.
* At the time of shipment, the sound mode is set to Super
Audio CD.
button in stop mode (not
button is pressed again, a playable layer or
button then
PLAY
button during playback.
button is pressed again, the playback is
PLAY
button on the player.
: Super Audio CD
button again to display the layer/
button
13