Switching Sound Mode (Super Audio Cd); Start Sound Mode - Marantz SA-1152 User Manual

Caution:
• Start sound mode has a memory retention function where
the settings remain stored and unchanged even when the
disc is changed or the power is turned off.
• At the time of shipment, the sound mode is set to Super
Audio CD.
®
Press the ISOUND MODEl button again to display the
layer/area to be played first, and then leave the setting for
at least two seconds to register the setting for the start
sound mode.
When a Super Audio CD hybrid layer discs that has both a
Super Audio CD high sound quality stereo area and an Audio
CD area information are to be played, this player makes it
possible to set the layer/area (Super Audio CD or Audio CD)
to be preferentially played.
This setting can be made when the tray is closed and there is
no disc in the disc tray.
G) Press
I
SOUND MODE
I
button on the player,
The currently selected layer/area is displayed.
If the Super Audio CD is selected : Super Audio CD
If the Audio CD is selected : CD
_ n
8
•
<»
0
,-, i~JJj(,:,i,"-:
0
-,
0
-&- 0
"6
..
0
~
CD
Press
ISOUND MODEl
button in stop mode (not
playing).
The currently selected layer or area is shown on the LCD,
(CD or Super Audio CD)
If
I
SOUND MODE
I
button is pressed again, a playable
layer or area will be shown, and the layer or area will be
switched to new one,
• When layer or area is switched, TOC will be read again,
• The sound mode cannot be changed for Audio CDs and
discs with only a Super Audio CD area.
• The sound mode on hybrid layer discs will be changed
in the following order.
Super Audio CD stereo area - CD layer - Super Audio
CD stereo area
• Sound mode can be selected while the tray is open.
Select a desired layer or area and press I
~
PLAY
I
button
then the tray will close and playback will be started.
["--o..;0_P_ER",,--" /j._:nO_N_' '-'
~~'" "'~~--:..-~~-----,~~~~~]
I
SWITCHING SOUND MODE ( START SOUND MODE )
(SUPER AUDIO CD)
@ Press the
ISOUND MODEl
button during playback.
The currently selected layer or area is shown on the LCD.
(CD or Super Audio CD)
If
I
SOUND MODE I button is pressed again, the playback
is stopped, and the layer or area will be switched to new
one.
When you want to listen at that area, press
I ~
PLAY
I
button again. The playback will be started.
15