Changing The Text Brightness On The Lcd (Lcd Contrast Adjustment); Turning Off The Display And Illumination (Display Operation) - Marantz SA-11S1 User Manual

OPERATION
CHANGING THE TEXT BRIGHTNESS ON
THE LCD (LCD CONTRAST ADJUSTMENT)
Changing procedure (Changes can be made from the main
unit when operation is stopped.)
q If playback is in progress, press the
playback.
w Hold down the
least two seconds. (This operation does not work on the
remote control.)
After holding down the button for two seconds, the current
contrast value is displayed. Within two seconds while it is
displayed, press the
contrast, or press the
Changes can be made to the contrast level over the entire
range (+8 to -8).
If the
seconds, the contrast is automatically set to the currently
displayed level.
Display example: Contrast +-0
e Pressing the
returns to the default setting (+-0).
* Any changes made to the LCD contrast setting are retained
even when the power is turned off.
* The range of the LCD contrast setting is preset to be small.
TURNING OFF THE DISPLAY AND
ILLUMINATION (DISPLAY OPERATION)
This function is used to turn the LCD and illumination lamps
(blue) on and off. (Two display statuses are available.)
1. Mode where LCD and illumination lamp (blue) turn on
Each time the
the LCD and illumination lamp (blue) switch on and off.
When Display Off is set, the Display Off indicator (red) lights
up.
* When any related button is pressed (such as when the
OPEN/CLOSE
used), the display is automatically turned on, but the
Display Off indicator (red) remains lit. If a track is started
in this state, the display is automatically turned off two
seconds later.
* When a track is stopped, the Display Off indicator (red)
and illumination lamp (blue) light up alternately.
Downloaded From Disc-Player.com Marantz Manuals
20
button to stop
STOP
button on the main unit for at
PAUSE
button to increase the
button to reduce the contrast.
or button is not pressed within two
button while changing the setting
STOP
button is pressed during playback,
DISPLAY
button, button, or
STOP
2. Setting for turning on only LCD (illumination lamp (blue)
remains off)
In the default state, the illumination lamp (blue) is lit. In this
state, the illumination lamp (blue) remains off regardless
of whether the LCD is turned on or off.
Changing procedure (Changes can be made when
operation is stopped.)
q If playback is in progress, press the
playback. To make the setting, hold down the
button for at least two seconds from the remote control
(RC-11SAS1).
w If the illumination lamp (blue) is lit, it is turned off and is set
off. To change the setting from off to on, hold down the
same operation
to turn on.
* The illumination lamp (blue) off setting is retained even when
the power is turned off, and this setting remains until the
setting is changed to the on setting.
* The LCD display on/off setting is not retained when the power
is turned off. (This enables you to enjoy operation each time
you use it.)
button is
button to stop
STOP
button for at least two seconds
DISPLAY
DISPLAY