Yamaha YFM4FAR Service Manual page 317

STEERING SYSTEM
Ball joint remover/installer set:
P/N. YM-01474/90890-01474
Ball joint remover/installer
attachment set:
P/N. YM-01477
3
Body
4
Long bolt
5
Short bolt
6
Remover washer
7
Remover spacer
8
Installer attachment
9
Installer spacer
0
Installer guide
Install the body 3, short bolt 5, remover
G
washer 6 and remover spacer 7 onto ball
joint.
NOTE:
Remover washer 6 must be aligned with the
G
projection on the head of the ball joint.
Surface a of the remover spacer 7 must be
G
aligned with surface b of the steering
knuckle.
Hold the body 3 in place while turning in the
G
short bolt 5 to remove the ball joint A from
the steering knuckle.
G
Remove the ball joint remover/installer.
Install the long bolt 4, installer spacer 9
G
and installer guide 0 onto the body 3.
8 - 37
CHAS
YM-01474
90890-01474
YM-01474
90890-01474
YM-01477
YM-01477
YM-01477
YM-01477
YM-01477
YM-01477