Adjusting The Rear Brake Light Switch; Checking The Final Gear Oil Level - Yamaha YFM4FAR Service Manual

ADJUSTING THE REAR BRAKE LIGHT SWITCH/

CHECKING THE FINAL GEAR OIL LEVEL

2.Adjust:
Rear brake light switch operation timing
G
***********************************************
Hold the main body 1 of the rear brake light
G
switch so that it does not rotate and turn the
adjusting nut 2 in direction a or b until the
rear brake light comes on at the proper time.
Direction a
Direction b
***********************************************
CHECKING THE FINAL GEAR OIL LEVEL
1.Place the machine on a level place.
2.Remove:
Oil filler bolt 1
G
3.Check:
Oil level
G
Oil level should be up to the brim of the hole.
Oil level low → Add oil to the proper level.
Recommended oil:
SAE 80 API "GL-4" Hypoid gear
oil
CAUTION:
Take care not allow foreign material to
enter the final gear case.
4.Install:
Oil filler bolt
G
3 - 44
CHK
ADJ
Brake light comes on
sooner.
Brake light comes on
later.
23 Nm (2.3 m • kg, 17 ft • lb)