Changing The Final Gear Oil - Yamaha YFM4FAR Service Manual

CHANGING THE FINAL GEAR OIL

3 - 45
CHANGING THE FINAL GEAR OIL
1.Place the machine on a level surface.
2.Remove:
Final gear case protector 1
G
3.Place a receptacle under the final gear case.
4.Remove:
Oil filler bolt
G
Drain plug 1
G
5.Drain:
Final gear oil
G
6.Install:
Drain plug
G
NOTE:
Check the drain plug gasket. If it is damaged,
replace it with a new one.
7.Fill:
Final gear case
G
Periodic oil change:
0.23 L (0.20 Imp qt, 0.24 US qt)
Total amount:
0.25 L (0.22 Imp qt, 0.26 US qt)
Recommended oil:
SAE 80 API "GL-4" Hypoid gear
oil
CAUTION:
Take care not to allow foreign material to
enter the final gear case.
8.Check:
Oil level
G
Refer to "CHECKING THE FINAL GEAR OIL
LEVEL".
9.Install:
Oil filler bolt
G
Final gear case protector
G
CHK
ADJ
23 Nm (2.3 m • kg, 17 ft • lb)
23 Nm (2.3 m • kg, 17 ft • lb)
16 Nm (1.6 m • kg, 11 ft • lb)