CRANKCASE
INSTALLING THE OIL PUMP DRIVE GEAR
1.Install:
Straight key
G
Oil pump drive gear
G
Lock washer
G
Oil pump drive gear nut
G
2.Tighten:
Oil pump drive gear nut
G
*****************************************************
Tightening steps:
Temporary install the clutch carrier assembly 1.
G
G
Hold the clutch carrier assembly with a clutch
holding tool 2 and tighten the oil pump drive
gear nut 3.
Clutch holding tool:
P/N. YM-91042, 90890-04086
G
Remove the clutch carrier assembly.
*****************************************************
3.Bend the lock washer tab 4.
4 - 64
ENG
New
50 Nm (5.0 m • kg, 36 ft • lb)