Fcc Compliance Statement - IDTECH ValueScan II User Manual

FCC WARNING STATEMENT
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation of this device is subject to the following conditions:
this device may not cause harmful interference and this
device must accept any interference received, including
interference that may cause undesired operation.
CANADIAN DOC STATEMENT
This digital apparatus does not exceed the Class B limits for
radio noise for digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of
Communications.
Le présent appareil numérique n‟émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de las classe B prescrites dans le
Réglement sur le brouillage radioélectrique édicté par les
ministère des Communications du Canada.
CE STANDARDS
Testing for compliance to CE requirements was performed
by an independent laboratory. The unit under test was found
compliant to class B limits of part 15 of the FCC Rules.
1