Table of Contents
Advertisement
Information menu
Follow the steps below to access the Information menu.
1. Press the Menu button to open the OSD menu.
2. Press the cursor left/right button to move to the Information menu.
3. Press the cursor up/down button to move up and down in the Information
The following table shows the options that you will see in the Information menu
and a brief description.
5-8
E500 Projector: User's Guide
Item
Description
Frequency
Press the cursor left/right button to adjust the A/D
sampling clock.
Frequency is only active when the input source is
Analog RGB.
Range: 0 to 100
Tracking
Press the cursor left/right button to adjust the A/D
sampling number.
Tracking is only active when the input source is
Analog RGB.
Range: 0 to 100
Cancel
Resets Video Type, Video AGC, and Projection to
default values.
menu.
Item
Video Information
Active Source
Software Version
Description
Displays the resolution and refresh rate of
the connected video device.
Information about active source
Information about software revisions.
Default
Auto detected
Auto detected
N/A
Advertisement
Table of Contents
