Setup menu
Follow the steps below to access the Setup menu.
1. Press the Menu button to open the OSD menu.
2. Press the cursor left/right button to move to the Setup menu.
3. Press the cursor up/down button to move up and down in the Setup menu.
The following table shows the options that you will see in the Setup menu and the
default.
Item
Video Type
Video Automatic
Grain Control
(AGC)
Projection
Description
Press the cursor left/right button to select the video
standard.
Video Type is only active when the input source is
Composite Video/SVideo/YPbPr
Range: Auto, NTSC, PAL, SECAM
Press the cursor left/right button to enable or
disable automatic grain control for video source.
Video AGC is only active when the input source is
Composite Video/SVideo/YPbPr
Range: On/Off
Press the cursor left/right button to choose from
four projection methods:
v Desktop mount, front of screen
v Desktop mount, rear of screen
v Ceiling mount, front of screen
v Ceiling mount, rear of screen
Chapter 5. On-Screen Display menu controls
Default
Auto
On
Desktop mount,
front of screen
5-7