Table of Contents
Advertisement
Projector wireless configuration
You can configure a wireless projector with OSD menu. C400 wireless OSD menu
also includes some special items such as Showing Projector's ID Number,
Connecting Reset, Wireless Repair, USB Image Display, Stop USB Image Display,
Enable WEP, Disable WEP, Refresh Session Key and Showing Session Key.
7-8
C400 Wireless Projector: User's Guide
Item
Video Information
Software Version
Lamp Hours
ID
Wireless Settings
Lamp Mode
Lamp Hour Reset
Cancel
Item
Connection Reset
USB image display
Stop USB image display
Description
Displays the resolution and refresh rate of
the connected video device.
Displays information about the firmware
version information.
Displays lamp hours used information.
Displays ID information
Displays Wireless Settings information. For
more information, go to "Projector Wireless
Configuration."
Toggles between Normal and ECO lamp
modes. ECO mode uses less power but
decreases the lamp brightness.
Reset this item after replacing the lamp.
For more information, refer to "Replacing
the projector lamp" on page 5-1.
Resets Lamp Mode to the default setting.
Description
Disconnects any existing current wireless
projecting session.
To allow the display of images from a USB
memory key.
To stop USB image display.
Advertisement
Table of Contents
